Application area

• Can be universally used for component thicknesses from 1.20 to 6.00mm depending on thread sized
• Larger anti-rotation features to increase performance in aluminum
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Designed to clinch into aluminum with a pre-pierced hole
• Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

• Thread sizes: M6 to M10
• P.C. 10 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to twist and ejection forces
• Nut positioning tolerance ranges can be halved as compared to welding methods
• Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

Application area

• For screwing counter plates with additional centering function
• Compression limiter

Technical Characteristics

• Thread sizes M6 – M8
• Can be universally used for various sheet metal thicknesses up to 2.50 mm.
• Suitable for extremely high dynamic and static axial loads
• High resistance to twist and ejection forces, even for thin sheet metal

EU Specific Fastener

Application area

• Can be used universally for component thicknesses of .8-1.75 mm and a tensile strength of up to 800 MPa
• Suitable for a wide range of high static load cases
• High torsion resistance in thin sheets
• Can also be used in aluminum
• Suitable for surface-treated, galvanized or painted components

Technical Characteristics

• Thread sizes M6 – M8
• Self-piercing, one-step processing (no hole preparation necessary)
• P.C. 8.8 (standard)
• Corrosion resistance according to customer requirements
• No impairment of the structure and function of the thread or damage by welding spatter
• High resistance to twist out and push out forces, even with thin component thicknesses
• Tolerance field limits for the positioning of the nut can be halved (compared to welding processes)
• Simple, process-accompanying and non-destructive quality checks by the worker instead of time-consuming destructive tests

NA Specific Fastener

Application area

• Can be universally used for component thicknesses from 0.64mm to 2.79mm
• Can be used in applications utilizing aluminum to HSLA
• This nut self-pierces the material so no pre-pierced hole is required
• Can be installed in a progressive die or in a C-Frame operation
• Suitable for use with surface-treated, galvanized, or painted components
• Typically, no bowl feeder is required as they are supplied on spools
• When the bulk version is utilized a feeder would be required

Technical Characteristics

• Thread sizes: M5 – M8
• Property Class 9 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to torque forces, even for thin sheet metal
• Stud positioning tolerances can be halved as compared to welding methods
• Straightforward, in-process non-destructive quality testing possible, instead of destructive testing

Application area

• Can be universally used for component thicknesses from 1.40 to 5.10mm depending on thread sized
• Can install into material with tensile strengths of up to 700 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Designed to be a self-piercing nut for most substrates
• Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

• Thread sizes: M6 to M12
• P.C. 10 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to twist out and push out forces
• Nut positioning tolerance ranges can be halved as compared to welding methods
• Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

Application area

• Can be universally used for component thicknesses from 0.7 to 3.5 mm and tensile strengths of up to 700 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Designed to be a self-piercing nut
• Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

• Thread sizes: M6 to M12
• P.C. 10 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to twist and ejection forces, even for thin sheet metals
• Nut positioning tolerance ranges can be halved as compared to welding methods
• Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

Application area

• Suitable for sheet thickness or 4.00 mm to 8.00mm
• For high axial loads in combination with limited installation space

Technical Characteristics

• Thread sizes M8 – M10
• Suitable for extremely high dynamic and static axial loads
• High resistance to twist and ejection forces, even for thick sheet metal

Application area

• These rivet nuts can be universally used for component thicknesses from 0.6 to 3.5 mm and tensile strengths of up to 1500 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Also suitable for the accommodation of lateral forces
• Can be used for GRP, CFRP, aluminum or other materials
• Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

• Thread sizes: M6 to M12
• P.C. 8.8 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• No component material thinning during riveting process
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to twist and ejection forces, even for thin sheet metals
• Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
• Nut positioning tolerance ranges can be halved as compared to welding methods
• Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

Application area

• Can be used for component thicknesses from 0.75 to 4.0 mm and tensile strengths of up to 1200 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Also suitable for the accommodation of lateral forces
• Can be used for GRP, CFRP, aluminum or other materials
• Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

• Thread sizes: M6 to M12
• P.C. 8.8 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• No component material thinning during riveting process
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to twist and ejection forces, even for thin sheet metals
• Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
• Nut positioning tolerance ranges can be halved as compared to welding methods
• Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

EU Specific Fastener

Application area

• Can be used for component thicknesses from 0.75 to 2.0 mm and tensile strengths of up to 1200 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Also suitable for the accommodation of lateral forces
• Can be used for aluminum
• Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

• The nut is placed from the screw fitting side
• Thread sizes: M6 and M8
• P.C. 8.8 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to twist and ejection forces, even for thin sheet metals
• Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
• Nut positioning tolerance ranges can be halved as compared to welding methods
• Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

Application area

• Round rivet nuts require little space
• Can be universally used for component thicknesses from 0.8 to 4.0 mm and tensile strengths of up to 1200 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Also suitable for the accommodation of lateral forces
• Can be used for GRP, CFRP, aluminum or other materials
• Suitable for use with surface-treated, galvanized or painted components

Technical characteristics

• Thread sizes: M6 to M14
• P.C. 8.8 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• No component material thinning during riveting process
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to twist and ejection forces, even for thin sheet metals
• Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
• Nut positioning tolerance ranges can be halved as compared to welding methods
• Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

EU Specific Fastener

Application area

• For single-stage processing and moderate loading cases.

Technical characteristics

• Thread sizes M5 – M10
• Pierce nut can be universally used for various sheet metal thicknesses up to 6.00 mm
• Suitable for quasi-static loads
• Excellent cost/performance ratio
• High resistance to twist-out/push-out forces, even for thin sheet metal

NA Specific Fastener

Application area

• For single-stage processing and moderate loading cases
• Emboss required in most cases

Technical characteristics

• Thread sizes M5 – M8
• Pierce nut can be universally used for various sheet metal thicknesses up to 6.00 mm
• Suitable for quasi-static loads
• Excellent cost/performance ratio
• High resistance to torque forces, even for thin sheet metal